A. copper loss
B. magnetising current
C. magnetising current and loss
D. efficiency of the transformer

Advertisement

Related Mcqs:

  1. The no-load current drawn by transformer is usually what per cent of the full-load current ?
    A. 0.2 to 0.5 per cent B. 2 to 5 per cent C. 12 to 15 per cent D. 20 to 30 per cent...
  2. In an actual transformer the iron loss remains practically constant from no load to full load because:____________?
    A. value of transformation ratio remains constant B. permeability of transformer core remains constant C. core flux remains practically constant D. primary voltage remains constant C. secondary voltage remains constant...
  3. Which of the following is the main advantage of an auto-transformer over a two winding transformer?
    A. Hysteresis losses are reduced B. Saving in winding material C. Copper losses are negligible D. Eddy losses are totally eliminated...
  4. The changes in volume of transformer cooling oil due to variation of atmospheric temperature during day and night is taken care of by which part of transformer?
    A. Conservator B. Breather C. Bushings D. Buchholz relay...
  5. In a given transformer for given applied voltage, losses which remain constant irrespective of load changes are______________?
    A. friction and windage losses B. copper losses C. hysteresis and eddy current losses D. none of the above...
  6. No-load current of a transformer has_____________?
    A. has high magnitude and low power factor B. has high magnitude and high power factor C. has small magnitude and high power factor D. has small magnitude and low power factor...
  7. The maximum load that a power transformer can carry is limited by its________________?
    A. temperature rise B. dielectric strength of oil C. voltage ratio D. copper loss...
  8. A no-load test is performed on a transformer to determine_______________?
    A. core loss B. copper loss C. efficiency D. magnetising current E. magnetising current and loss...
  9. In a step-down transformer, there is a change of 15 A in the load current. This results in change of supply current of_________________?
    A. less than 15 A B. more than 15 A C. 15 A D. none of the above...
  10. In a given transformer for a given applied voltage, losses which remain constant irrespective of load changes are__________?
    A. hysteresis and eddy current losses B. friction and windage losses C. copper losses D. none of the above...
Advertisement